Hotline: +84.91.9708.834

Tungsten Powder Manufacturing Method

Tungsten powder preparation method of hydrogen and carbon reduction, these two methods are the early tungsten powder preparation method. Its principle is to reduce raw material of tungsten trioxide (WO3) or ammonium paratungstate (APT) in a reducing atmosphere (hydrogen or carbon) to tungsten powder. While, the tungsten oxide carbon reduction method is the earlier method for preparing tungsten powder with the reduction temperature up to 1050°C and lower purity of the obtained tungsten powder.

Some new methods for preparing tungsten powder are high-energy ball milling, gas evaporation, plasma, SHS reduction, molten salt electrolysis, tungsten oxide powder reduction method ect., these methods are suitable for preparing nano tungsten powder, and exhibits good prospects for development.

Tungsten metal powder

Energy ball milling method is by rotating or vibrating to make hard ball to strongly hit, grain and mix the raw material, which can significantly reduce the activation energy, refining grains, enhancing powder’s activity, increasing sintering ability, and induce low-temperature chemical reaction, thus finally crush the metal or alloy powder into the nanoscale particles.

Gas evaporation method is usually used for the dry production of nano-powder, with the principle of the supersaturation concentration of metal vapor in the absence of refrigerant and crystal nucleation carrier gas (such as argon, nitrogen).

Self-propagating high-temperature synthesis (SHS) is a method for producing inorganic compounds by exothermic reactions, usually involving salts or pure metals. A variant of this method is known as solid state metathesis (SSM). Since the process occurs at high temperatures, the method is ideally suited for the production of refractory materials with unusual properties, for example: powders, metallic alloys, or ceramics with high purity, corrosion–resistance at high–temperature or super-hardnessity.



Customer interested please contact :

AKhon Company Limited

Address : No. 54, Tong Dan street, Hoang Van Thu ward, Langson city, Langson province, Vietnam
Tel : +84.253.776.667  - Fax : +84.253.713.712
Email: nghia.akhon@gmail.com - website: www.akhon.net 
Person contract : Mr David Nguyen (Cellphone : +84-918-708-834) 
Skype ID : bach.nghia 
WhatsApp/Zalo/WeChat : +84919708834

Hanoi representative office

Address : 10th floor, VP3 building, Linh Dam peninsula, Hoang Mai district, Hanoi, Vietnam.
Email : kien.akhon@gmail.com - website: www.akhon.net 
Person contract : Mr Kelvin Pham (Cellphone : +84-989-552-196) 

Ho Chi Minh representative office

Address : C40BIS, Nguyen Van Qua str., Dong Hung Thuan ward, District 12, Ho Chi Minh city, Vietnam.
Email : 0916344305@outlook.com - website: www.akhon.net


WeChat (Pls scan QR) Zalo (Pls scan QR)

Inquiry form

If you have any other question or inquiry of product, please fill in the following inquiry form, we will reply you immediately